WAZER
-
Category：Metal Processing & Safety EquipmentMetal processing machine, equipment
- NO：RWA-ST01
Top Specs
Cutting Area (D x W). 12 x 18 in. 305 x 460 mm
Kerf (width of cut). 0.044 in 1.2 mm
Abrasive Rate 0.33 lb/min . 0.15 kg/min
Power Requirement 110V / 60Hz (North America)
220V / 50Hz (International)
Cutting Specs
Cutting Area (D x W) 12 x 18 in 305 x 460 mm
Cut Bed Size (D x W) 13 x 19 in 330 x 485 mm
Kerf (width of cut) 0.044 in 1.2 mm
Cutting Materials Cuts metal, glass, plastic, composites, tile, rubber, foam
Continuous Cutting Time. 60 min (prior to refilling the abrasive hopper)
Gantry Max Speed 59 IPM 1,500 mm/min
Gantry Positional Accuracy 0.003 in 0.08 mm
Power Specs
110V / 60Hz WAZER (North America) Compatible with all countries whose electrical standard is 110V / 60Hz
Waterjet Main Unit 100-240 VAC, 50/60Hz, 2A, 200W
Pump Box 110-120 VAC, 60Hz, 14A, 1,500W
220V / 50Hz WAZER (International) Compatible with all countries whose electrical standard is 220V / 50Hz
Waterjet Main Unit 100-240 VAC, 50/60Hz, 2A, 200W
Pump Box 220-240 VAC, 50Hz, 7.5A, 1,500W
High Pressure Water Specs
Maximum Allowable Working Pressure Pressure 4,600 psi317 bar
Maximum Working Flow Rate (at 4,000 psi) 0.5 GPM 1.9 L/min
Orifice Diameter 0.019 in 0.48 mm
Orifice Material Ruby or Sapphire
Mixing Tube Diameter (internal) 0.045 in 1.1 mm
Water Drainage Specs
Water Drain Distance from Waterjet (maximum) 30 ft 9 m
Water Drain Height above Waterjet (maximum) 4 ft 1.2 m
Water Drainage Flow Rate(maximum) 1.5 GPM 5.7 L/min
Water Recirculation Not Recommended
Misc Specs
Waterjet Main Unit Size (Standup) 34 x 26 x 48 in 856 x 648 x 1220 mm
Pump Box Size 21 x 15 x 10 in 533 x 379 x 251 mm
Waterjet Main Unit Weight (empty tank) 110 lb 50 kg
Waterjet Main Unit Weight (filled tank) 400 lb 180 kg
Pump Box Weight 92 lb 42 kg
Connectivity Offline. No internet required to run the Waterjet.
Noise Emission 74 +/- 3dB
Noise Pressure Level 87 +/- 3dB
Room Temperature (operating) 32 – 160 °F 0 – 70 °C
Room Temperature (storage) 32 – 104 °F 0 – 40 °C
Cutting Area (D x W). 12 x 18 in. 305 x 460 mm
Kerf (width of cut). 0.044 in 1.2 mm
Abrasive Rate 0.33 lb/min . 0.15 kg/min
Power Requirement 110V / 60Hz (North America)
220V / 50Hz (International)
Cutting Specs
Cutting Area (D x W) 12 x 18 in 305 x 460 mm
Cut Bed Size (D x W) 13 x 19 in 330 x 485 mm
Kerf (width of cut) 0.044 in 1.2 mm
Cutting Materials Cuts metal, glass, plastic, composites, tile, rubber, foam
Continuous Cutting Time. 60 min (prior to refilling the abrasive hopper)
Gantry Max Speed 59 IPM 1,500 mm/min
Gantry Positional Accuracy 0.003 in 0.08 mm
Power Specs
110V / 60Hz WAZER (North America) Compatible with all countries whose electrical standard is 110V / 60Hz
Waterjet Main Unit 100-240 VAC, 50/60Hz, 2A, 200W
Pump Box 110-120 VAC, 60Hz, 14A, 1,500W
220V / 50Hz WAZER (International) Compatible with all countries whose electrical standard is 220V / 50Hz
Waterjet Main Unit 100-240 VAC, 50/60Hz, 2A, 200W
Pump Box 220-240 VAC, 50Hz, 7.5A, 1,500W
High Pressure Water Specs
Maximum Allowable Working Pressure Pressure 4,600 psi317 bar
Maximum Working Flow Rate (at 4,000 psi) 0.5 GPM 1.9 L/min
Orifice Diameter 0.019 in 0.48 mm
Orifice Material Ruby or Sapphire
Mixing Tube Diameter (internal) 0.045 in 1.1 mm
Water Drainage Specs
Water Drain Distance from Waterjet (maximum) 30 ft 9 m
Water Drain Height above Waterjet (maximum) 4 ft 1.2 m
Water Drainage Flow Rate(maximum) 1.5 GPM 5.7 L/min
Water Recirculation Not Recommended
Misc Specs
Waterjet Main Unit Size (Standup) 34 x 26 x 48 in 856 x 648 x 1220 mm
Pump Box Size 21 x 15 x 10 in 533 x 379 x 251 mm
Waterjet Main Unit Weight (empty tank) 110 lb 50 kg
Waterjet Main Unit Weight (filled tank) 400 lb 180 kg
Pump Box Weight 92 lb 42 kg
Connectivity Offline. No internet required to run the Waterjet.
Noise Emission 74 +/- 3dB
Noise Pressure Level 87 +/- 3dB
Room Temperature (operating) 32 – 160 °F 0 – 70 °C
Room Temperature (storage) 32 – 104 °F 0 – 40 °C
FLUX TECHNOLOGY INC
- Website：https://tw.flux3dp.com
The FLUX Team
FLUX Inc. was founded in Taiwan in 2014, had gathered people talented in multiple fields with shared believe in value of creativity. In the same year, the team headed to Silicon Valley, USA, and successfully raised more than US$1 million in a Kickstarter backer project which marks a record-breaking crowdfunding campaign in Taiwan. From then on, FLUX gradually formed as a brand that developed a series of digital solutions to the globe.
FLUX Inc. was founded in Taiwan in 2014, had gathered people talented in multiple fields with shared believe in value of creativity. In the same year, the team headed to Silicon Valley, USA, and successfully raised more than US$1 million in a Kickstarter backer project which marks a record-breaking crowdfunding campaign in Taiwan. From then on, FLUX gradually formed as a brand that developed a series of digital solutions to the globe.
